bassf.blogg.se

1. AEON LABS Z STICK FIRMWARE UPDATE INSTALL
2. AEON LABS Z STICK FIRMWARE UPDATE UPDATE
3. AEON LABS Z STICK FIRMWARE UPDATE DRIVER
4. AEON LABS Z STICK FIRMWARE UPDATE SOFTWARE

AEON LABS Z STICK FIRMWARE UPDATE DRIVER

Using the links provided above I had to download the Z-flash utility from HomeSeer and connected this as a secondary controller to my Hubitat, after installing the driver on a windows 10 PC. Using the generic "non smart" driver I could get them to function but when I tried to modify the custom device handler from Smartthings community it wouldn't work either and I was hoping to be able to use this to set some of the parameters for fade time etc. They have always functioned flawlessly and I never saw the need to change the firmware. I have about 50 of these, which I installed last year using Smartthings generic device drivers. I emailed support and got promptly referred to this topic referencing the updated z-wave firmware for these dimmers. Unfortunately this didn't work with the Dimmers which were not reporting a physical or digital change, although the device would switch on and off and dim. This has solved my problem - the Leviton Z-wave plus dimmers (**Models DZD6HD and DZ1KD) were being recognized by Hubitat correctly and the Generic Smart Zwave Dimmer was being applied. HomeSeer Z-Flash Kit (Includes USB Adapter) Now this is probably not needed, but I did this for more of peace of mind, all the smartapps will still exist, you would just need to re-add the device. Just to eliminate any possible issues after updating I did go through each device and exclude them from HE, reset each device to factory defaults and re-included it.

AEON LABS Z STICK FIRMWARE UPDATE UPDATE

I would use a laptop and find a central location in the house to update them. Also I did find that two of my dimmers were not found the first time, but after I updated the rest those two showed up and I was able to successfully update them. It will take a while to flash the devices so be patient. You can also flash all Dimmers/Switches of the same model at one time.

AEON LABS Z STICK FIRMWARE UPDATE SOFTWARE

The Z-Flash software comes with the Leviton firmware hex files, so you will not need to download these. The Z-Flash will basically poll for each device and give you a listing of all devices and the current FW version. Then run the Z-flash software and it should find the USB adapter. Otherwise you can buy Homeseer's kit that includes a Z-wave/Zigbee USB adapter and you would include this device to HE and then you can update the FW. I had to force it to install, because Windows did not detect it as the correct driver, but it does work fine.

AEON LABS Z STICK FIRMWARE UPDATE INSTALL

You will need to manually install the driver from device manager. I have also linked the Windows driver you will need in order to use Hubitat's USB adapter. I used a Windows 10 computer, so not sure if its possible with Linux/OSX. If you choose to use Hubitat's USB adapter you will need to shutdown the hub and insert the USB adapter into a PC. Hubitat's USB adapter actually stores all of the Z-wave information on it, so you will not need to exclude/include any of your devices. Either way you will need HomeSeer's Z-Flash software to update them. There are two ways you can perform the upgrade, either with Hubitat's USB adapter or HomeSeer's. Where do I get the Hex files - do I need to contact Leviton or is there a download I am unable to find with searches?ĭid the z-wave stick that came with Hubitat work? Or could I use the stick that comes with HE and just get the z-flash software?Ĭould you expand on how you eventually did this please.? I have many of these dimmers and they are not working correctly with the Generic Smart Z-Wave Dimmer driver.